1 / 6d62 · Power board of a Qsc K12.2 powered speaker
Photos show this part as we found it on boards during repairs - not the stock you'll receive.
Found in these devices
Where we've identified this part on boards we've worked on.
| Device | Board | Position on board |
|---|---|---|
| Qsc KW152 powered speaker | Power board | D38, D39, D24, D23 |
| Qsc KW181 powered sub | Main board | D38, D39, D24, D23 |
| Qsc K12.2 powered speaker | Power board | D24, D62 |
Often found with
Parts we stock that sit on the same boards - handy when the fault is in that area.
UCC2893PW
Current-mode PWM controller IC, dual output, 16-pin DIP package.
On 2 of the same board photos
MMBTA42
On 2 of the same board photos
10UF 25V 1206
Ceramic capacitor, 10 microfarad, 25 volt, surface mount 1206 package.
On 2 of the same board photos
STP11NM60FD
N-channel power MOSFET, 600V 11A, fast diode
On 2 of the same board photos
GENERIC CERAMIC CAPACITOR
Ceramic capacitor, general purpose, various voltage and capacitance ratings available.
On 2 of the same board photos
IRS20957S
Single-channel gate driver IC, high-side/low-side MOSFET driver.
On 1 of the same board photo
10 OHM 1206
Thick-film chip resistor, 10 ohms, 1206 surface mount package.
On 1 of the same board photo
10A 5X20MM
Fuse, 10 ampere, 5x20 millimeter cartridge type.
On 1 of the same board photo