1 / 1Right amp of a Cvr KM-2160 amplifier
Photos show this part as we found it on boards during repairs - not the stock you'll receive.
3.3 ohm 2w
Thick film resistor, 3.3 ohm, 2 watt power rating.
A value name for a resistor (through-hole), not a manufacturer part number - any part with these specs will do.
- Identified on 1 board photo in 1 device
Found in these devices
Where we've identified this part on boards we've worked on.
| Device | Board | Position on board |
|---|---|---|
| Cvr KM-2160 amplifier | Right amp |
Often found with
Parts we stock that sit on the same boards - handy when the fault is in that area.
100 OHM 0.25W
Resistor, carbon film, 100 ohm, quarter watt tolerance.
On 1 of the same board photo
47K OHM 0.25W
Resistor, 47 kilohm, quarter-watt carbon film or composition.
On 1 of the same board photo
1K OHM 0.25W
Resistor, 1 kilohm, quarter watt carbon film.
On 1 of the same board photo
1.5K OHM 0.25W
Resistor, 1.5 kilohm, quarter-watt carbon film or composition.
On 1 of the same board photo
0.22 OHM 5W AXIAL CEMENT
Wirewound resistor, 0.22 ohm 5-watt axial lead cement coat.
On 1 of the same board photo
2N5551
On 1 of the same board photo
NJW0281G
NPN audio power transistor, 250V 15A, TO-3P
On 1 of the same board photo
NJW0302G
PNP audio power transistor, 250V 15A, TO-3P
On 1 of the same board photo