1 / 2d29 · Power board of a Electro-voice ELX115P powered speaker
Photos show this part as we found it on boards during repairs - not the stock you'll receive.
Found in these devices
Where we've identified this part on boards we've worked on.
| Device | Board | Position on board |
|---|---|---|
| Electro-voice ELX112P powered speaker | Power board | D24, D29 |
| Electro-voice ELX115P powered speaker | Power board | D24, D29 |
| Electro-voice ZXA1-SUB powered sub | Power board | D24, D29 |
| Samson EXPEDITION XP1000 powered mixer | Power board | D24, D29 |
From our repair bench
2
repairs involving this part
1
times replaced
0
found faulty
1
checked and OK
In 0 of 1 repairs where it was replaced, the device was fixed.
Failed or replaced in: Electro-voice ZXA1-SUB (1)
Totals across every repair logged on Circuit Fixers.
Often found with
Parts we stock that sit on the same boards - handy when the fault is in that area.
0.05 OHM 2512
Thick-film power resistor, 2512 package, low ohm value.
On 1 of the same board photo
STP17NK40ZFP
N-channel power MOSFET, 400V 16A, TO-220 package
On 1 of the same board photo
BAS316
Switching diode, 100V 250mA, SOD-323
On 1 of the same board photo
BC807-25
PNP small-signal transistor, general purpose amplification
On 1 of the same board photo
KSP44
On 1 of the same board photo
10 OHM 0402
Thick film resistor, 10 ohms, 0402 surface mount package.
On 1 of the same board photo
BZT52C12S
On 1 of the same board photo
BCP56-16
On 1 of the same board photo